Home › Refrigerator Water Filters › Whirlpool › KFFS20EYMS04

KFFS20EYMS04
Exact-Fit Model Guide

Water Filter for the KitchenAid KFFS20EYMS04 (EDR1RXD1)

Your Whirlpool refrigerator takes the EDR1RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KFFS20EYMS04 replacement water filter cartridge
Replacement cartridge for this model
KFFS20EYMS04 · Quick Facts
TYPE
refrigerator
YEARS MADE
2011-2015
FILTER LOCATION
in the fresh-food compartment, placement dependent on the dispenser package
FILTER SLOT
EveryDrop Filter 1 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
kffs20eyms, kffs20eyms00, kffs20eyms01, kffs20eyms02
KFFS20EYMS04 · Quick Facts
Filter locationin the fresh-food compartment, placement dependent on the dispenser package
Filter slotEveryDrop Filter 1 bay
Replace everyEvery 6 months
Years made2011-2015
Also branded askffs20eyms, kffs20eyms00, kffs20eyms01, kffs20eyms02
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for KFFS20EYMS04. Cross-checked against Whirlpool service documentation — this model family uses the EDR1RXD1 bay with no chip or bypass restrictions.

KFFS20EYMS04 specifics — where the filter actually lives

Where the filter actually lives: in the fresh-food compartment, placement dependent on the dispenser package, a spot that survives trim changes across the refrigerator run. This is a twist-style bay, the friendlier design: the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.

Order-day practicalities: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. Under the cabinet differences one thing holds: the EDR1RXD1 media line; that is the anchor every compatible listing hangs from. Revision 04 changed trim details, not the water circuit; order with confidence by model stem.

Reading the KFFS20EYMS04 model code — what the digits tell you

By model-code convention the KFFS20EYMS04 falls around 2011 to 2015; treat the dates as a working estimate, not record. Fit listings tell the same story: this generation runs on the EDR1RXD1 line across every cabinet variant.

Swap it in 5 minutes

Installing the replacement water filter in the KFFS20EYMS04
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KFFS20EYMS04 filter questions

Filter light reset on the KitchenAid KFFS20EYMS04 — how?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the KFFS20EYMS04 owner’s manual page for filter status.

Is a bypass plug required for the KFFS20EYMS04 when the cartridge is removed?

You can, but unfiltered — the EDR1RXD1 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a KitchenAid refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR1RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KFFS20EYMS04?

Every six months or at the rated gallon capacity, whichever comes first — the EDR1RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR1RXD1 cartridge

This bay takes the OEM EDR1RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →