Home › Refrigerator Water Filters › Whirlpool › KFFS20EYBL01
Water Filter for the KitchenAid KFFS20EYBL01 (EDR2RXD2)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KFFS20EYBL01 specifics — where the filter actually lives
Finding the bay is the easy part — this chassis puts it in the fresh-food compartment — exact spot varies by dispenser layout, a deliberate placement that keeps the swap away from the door seals and drawer rails. The seat is a twist-in design — release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.
Order-day practicalities: a first removal that fights a set o-ring, and a status light that needs a manual hold-to-reset before it acknowledges the new cartridge. The constant across every trim of this machine is the cartridge line — the EDR2RXD2 cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike. The -01 tail tracks the revision ladder — each rung shares the identical EDR2RXD2 bay.
Reading the KFFS20EYBL01 model code — what the digits tell you
The KFFS20EYBL01 decodes to about 2011 to 2015 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify. Filter logic on this chassis: the water path is fixed at the EDR2RXD2 line — that asymmetry is what makes filter shopping simple.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KFFS20EYBL01 filter questions
Clearing the filter status light on a KitchenAid KFFS20EYBL01?
Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the KFFS20EYBL01 owner’s manual page for filter status.
Does the KitchenAid KFFS20EYBL01 need a bypass plug when the filter is out?
Nothing to buy — the EDR2RXD2 housing closes without a cartridge; water runs unfiltered until the next one goes in.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR2RXD2 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KFFS20EYBL01?
Every six months or at the rated gallon capacity, whichever comes first — the EDR2RXD2 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| Cartridge | OEM EDR2RXD2 | RECOMMENDEDEDR2RXD1 Replacement Water Filter · 1-Pack – ClearFit |
|---|---|---|
| Price | OEM list | $17.99 |
| Verified fit | ✓ the bay cartridge | View & buy → |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →