Home › Refrigerator Water Filters › Whirlpool › KBRS22ETWH00
Water Filter for the KitchenAid KBRS22ETWH00 (EDR4RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KBRS22ETWH00 specifics — where the filter actually lives
The KBRS22ETWH00 carries its water filter in the lower fresh-food zone in most side-by-side layouts, knee height or below, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the KBRS22ETWH00 uses a twist-in cartridge: no tools, no housing removal, and the cartridge indexes in only one orientation despite looking symmetric.
Order-day practicalities: expect dribble at the bay on removal even with the supply off, and remember the indicator will not self-clear — hold the reset control. Decode the plate and the parts question answers itself: count on KBR to place this unit among side-by-side variant builds; that placement carries the water-path geometry with it. The 00 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.
KBR vs KSR — what the prefix tells you
Know your KBR from your KSR and the cartridge question halves: split by cabinet mission (side-by-side variant versus side-by-side chassis), joined by cartridge line — that is the KBR/KSR story. By model-code convention the KBRS22ETWH00 falls around 2007-2011; treat the dates as a working estimate, not record.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KBRS22ETWH00 filter questions
How to reset the water filter indicator: KitchenAid KBRS22ETWH00?
Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the KBRS22ETWH00 manual’s filter-status page has the exact spot.
KBRS22ETWH00 with no water filter installed — safe, or does it need a bypass?
No — run it empty if you like; the EDR4RXD1 bay needs no bypass plug, it simply passes water through untreated.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR4RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KBRS22ETWH00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| Cartridge | OEM EDR4RXD1 | RECOMMENDEDUKF8001 Replacement Water Filter · 1-Pack – ClearFit | EDR4RXD1 EveryDrop Filter 4 Replacement · 1-Pack – ClearFit | UKF8001 Replacement Water Filter · 3-Pack – ClearFit |
|---|---|---|---|---|
| Price | OEM list | $17.99 | $17.99 | $44.97 |
| Verified fit | ✓ the bay cartridge | View & buy → | View & buy → | View & buy → |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →