HomeRefrigerator Water FiltersWhirlpoolKBRS20EVBL00

KBRS20EVBL00
Exact-Fit Model Guide

Water Filter for the Kenmore KBRS20EVBL00 (EDR4RXD1)

Your Whirlpool refrigerator takes the EDR4RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KBRS20EVBL00 replacement water filter cartridge
Replacement cartridge for this model
KBRS20EVBL00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2008-2012
FILTER LOCATION
in the lower fresh-food zone in most side-by-side layouts, knee height or below
FILTER SLOT
EveryDrop Filter 4 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
KBRS20EVBL00 · Quick Facts
Filter locationin the lower fresh-food zone in most side-by-side layouts, knee height or below
Filter slotEveryDrop Filter 4 bay
Replace everyEvery 6 months
Years made2008-2012
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for KBRS20EVBL00. Cross-checked against Whirlpool service documentation — this model family uses the EDR4RXD1 bay with no chip or bypass restrictions.

KBRS20EVBL00 specifics — where the filter actually lives

The KBRS20EVBL00 carries its water filter in the lower fresh-food zone in most side-by-side layouts, knee height or below, so expect to clear one shelf edge before you have working room. Mechanically the KBRS20EVBL00 uses a twist-in cartridge: the cartridge drops into the keyed seat and locks with a short quarter turn.

Order-day practicalities: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. Prefix literacy pays here: generally a side-by-side variant machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. Revision 00 changed trim details, not the water circuit; order with confidence by model stem.

KBR vs KSR — what the prefix tells you

Same parts shelf, two cabinet missions — side-by-side variant builds carry KBR; side-by-side chassis builds carry KSR. Filter-wise the two lines converge on one cartridge family. By model-code convention the KBRS20EVBL00 falls around 2008 to 2012; treat the dates as a working estimate, not record.

Swap it in 5 minutes

Installing the replacement water filter in the KBRS20EVBL00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KBRS20EVBL00 filter questions

How do I reset the filter light on the Kenmore KBRS20EVBL00?

Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the KBRS20EVBL00 manual’s filter-status page has the exact spot.

Can I run the Kenmore KBRS20EVBL00 with no cartridge installed?

Nothing to buy — the EDR4RXD1 housing closes without a cartridge; water runs unfiltered until the next one goes in.

Are off-brand filters safe for a Kenmore refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR4RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KBRS20EVBL00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR4RXD1 cartridge

This bay takes the OEM EDR4RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →