Home › Refrigerator Water Filters › Whirlpool › KBLS36FKB00

KBLS36FKB00
Exact-Fit Model Guide

Water Filter for the KitchenAid KBLS36FKB00 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

KBLS36FKB00 replacement water filter cartridge
Replacement cartridge for this model
KBLS36FKB00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2001-2005
FILTER LOCATION
in the fresh-food compartment — exact spot varies by dispenser layout
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
—
KBLS36FKB00 · Quick Facts
Filter locationin the fresh-food compartment — exact spot varies by dispenser layout
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2001-2005
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for KBLS36FKB00. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

KBLS36FKB00 specifics — where the filter actually lives

The filter bay on the KBLS36FKB00 in the fresh-food compartment — exact spot varies by dispenser layout, the same estate every refrigerator in this family uses. This is a twist-style bay, the friendlier design: a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.

Two quirks worth knowing before you order: the line is still live when you open the bay, so keep a towel in reach, and expect the filter-status light to need a reset before it believes the new cartridge. Under the cabinet differences one thing holds: the EDR5RXD1 cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike. A -00 style suffix means running production revisions; filter fit stayed constant across the whole run.

Reading the KBLS36FKB00 model code — what the digits tell you

The KBLS36FKB00 code suggests roughly 2001-2005 production — approximately right, which is all a parts search needs. Cross-checking by chassis pays off here: the same EDR5RXD1 family covers this chassis end to end.

Swap it in 5 minutes

Installing the replacement water filter in the KBLS36FKB00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

KBLS36FKB00 filter questions

Clearing the filter status light on a KitchenAid KBLS36FKB00?

Lock in the new cartridge first, then hold the reset control for a few seconds — the KBLS36FKB00 manual documents the button for each panel variant.

Is a bypass plug required for the KBLS36FKB00 when the cartridge is removed?

No — the EDR5RXD1 bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a KitchenAid refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my KBLS36FKB00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →