Home › Refrigerator Water Filters › Whirlpool › KBLC36FKS00
Water Filter for the KitchenAid KBLC36FKS00 (EDR5RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
KBLC36FKS00 specifics — where the filter actually lives
The filter bay on the KBLC36FKS00 inside the fresh-food cavity, position varying with dispenser spec, a deliberate placement that keeps the swap away from the door seals and drawer rails. It is a twist-lock bay: seat the cartridge against the o-ring, quarter-turn clockwise, and let the keyed flange do the aligning for you.
Owners of the KBLC36FKS00 report the same friction points: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. Whatever the badge on the door says, the parts reality is this chassis drinks from the EDR5RXD1 family, one of the most cross-referenced cartridges in the KitchenAid catalog. The 00 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.
Reading the KBLC36FKS00 model code — what the digits tell you
The KBLC36FKS00 decodes to about 2001 to 2005 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify. The model code varies with trim, but the parts logic does not: the EDR5RXD1 cartridge is the one constant across the model run.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
KBLC36FKS00 filter questions
Reset procedure for the change-filter alert on the KBLC36FKS00?
Hold the filter-reset control a few seconds after the swap; the status light clears only with a seated cartridge, and the KBLC36FKS00 manual maps the control by panel type.
Running the KBLC36FKS00 with an empty filter bay — does it need a cap?
No cap needed — the EDR5RXD1 bay passes water unfiltered while empty; it does not leak, it just skips filtration.
Are off-brand filters safe for a KitchenAid refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR5RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my KBLC36FKS00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →