HomeRefrigerator Water FiltersWhirlpoolJFC2089HPF3

JFC2089HPF3
Exact-Fit Model Guide

Water Filter for the Jenn-air JFC2089HPF3 (EDR4RXD1)

Your Whirlpool refrigerator takes the EDR4RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

JFC2089HPF3 replacement water filter cartridge
Replacement cartridge for this model
JFC2089HPF3 · Quick Facts
TYPE
refrigerator
YEARS MADE
2018-2022
FILTER LOCATION
high on the fresh-food side in most French-door layouts — upper back or left wall
FILTER SLOT
EveryDrop Filter 4 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
JFC2089HPF3 · Quick Facts
Filter locationhigh on the fresh-food side in most French-door layouts — upper back or left wall
Filter slotEveryDrop Filter 4 bay
Replace everyEvery 6 months
Years made2018-2022
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for JFC2089HPF3. Cross-checked against Whirlpool service documentation — this model family uses the EDR4RXD1 bay with no chip or bypass restrictions.

JFC2089HPF3 specifics — where the filter actually lives

On the JFC2089HPF3, the cartridge high on the fresh-food side in most French-door layouts — upper back or left wall, a deliberate placement that keeps the swap away from the door seals and drawer rails. This is a twist-style bay, the friendlier design: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.

Owners of the JFC2089HPF3 report the same friction points: a stubborn first twist when the old o-ring has set, and a change-filter light that will not clear itself until you hold the reset. Prefix literacy pays here: it usually places the machine in the French-door family, a strong hint at the cartridge line, the reset behavior, and the service documentation worth consulting. The F3 ending is a finish code — color and handle options, not mechanical ones. Every finish of this chassis takes the same cartridge.

JFC vs JFX — what the prefix tells you

The French-door family keeps one water path across JFC and JFX; nothing about the cartridge changes between them. The JFC2089HPF3 decodes to about 2018-2022 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify.

Swap it in 5 minutes

Installing the replacement water filter in the JFC2089HPF3
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

JFC2089HPF3 filter questions

Jenn-Air JFC2089HPF3: how do I clear the change-filter light?

Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the JFC2089HPF3 manual’s filter-status page has the exact spot.

Does the Jenn-Air JFC2089HPF3 need a bypass plug when the filter is out?

No bypass needed: the EDR4RXD1 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a Jenn-Air refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR4RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my JFC2089HPF3?

Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR4RXD1 cartridge

This bay takes the OEM EDR4RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →