Home › Refrigerator Water Filters › Whirlpool › ID2HHEXTS01

ID2HHEXTS01
Exact-Fit Model Guide

Water Filter for the Whirlpool ID2HHEXTS01 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

ID2HHEXTS01 replacement water filter cartridge
Replacement cartridge for this model
ID2HHEXTS01 · Quick Facts
TYPE
refrigerator
YEARS MADE
2007-2011
FILTER LOCATION
in the fresh-food compartment, placement dependent on the dispenser package
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
—
ID2HHEXTS01 · Quick Facts
Filter locationin the fresh-food compartment, placement dependent on the dispenser package
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2007-2011
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for ID2HHEXTS01. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

ID2HHEXTS01 specifics — where the filter actually lives

On the ID2HHEXTS01, the cartridge in the fresh-food compartment, placement dependent on the dispenser package, so expect to clear one shelf edge before you have working room. This is a twist-style bay, the friendlier design: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.

Owners of the ID2HHEXTS01 report the same friction points: a first removal that fights a set o-ring, and a status light that needs a manual hold-to-reset before it acknowledges the new cartridge. One more anchor for the parts search: the EDR5RXD1 line — which is why fit listings key on chassis rather than door style. The 01 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.

Reading the ID2HHEXTS01 model code — what the digits tell you

The ID2HHEXTS01 code suggests roughly 2007-2011 production — approximately right, which is all a parts search needs. One generation, one cartridge: model-code suffixes track cosmetics; the EDR5RXD1 fit is invariant across them.

Swap it in 5 minutes

Installing the replacement water filter in the ID2HHEXTS01
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

ID2HHEXTS01 filter questions

Whirlpool ID2HHEXTS01: how do I clear the change-filter light?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the ID2HHEXTS01 owner’s manual lists the button location for your control panel.

Can I run the Whirlpool ID2HHEXTS01 with no cartridge installed?

Nothing to buy — the EDR5RXD1 housing closes without a cartridge; water runs unfiltered until the next one goes in.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my ID2HHEXTS01?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →