Water Filter for the Whirlpool GT1SHTXMQ02 (EDR6D1)

Your Whirlpool refrigerator takes the EDR6D1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GT1SHTXMQ02 · Quick Facts

TYPE

refrigerator

YEARS MADE

2003-2007

FILTER LOCATION

in the fresh-food compartment — exact spot varies by dispenser layout

FILTER SLOT

EveryDrop Filter 6 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

gt1shtxmq00, gt1shtxmq01, gt1shtxmq03, gt1shtxmq04

GT1SHTXMQ02 · Quick Facts

Filter locationin the fresh-food compartment — exact spot varies by dispenser layout

Filter slotEveryDrop Filter 6 bay

Replace everyEvery 6 months

Years made2003-2007

Also branded asgt1shtxmq00, gt1shtxmq01, gt1shtxmq03, gt1shtxmq04

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GT1SHTXMQ02. Cross-checked against Whirlpool service documentation — this model family uses the EDR6D1 bay with no chip or bypass restrictions.

Not your model? Check the finder →

GT1SHTXMQ02 specifics — where the filter actually lives

The GT1SHTXMQ02 carries its water filter in the fresh-food compartment — exact spot varies by dispenser layout, a deliberate placement that keeps the swap away from the door seals and drawer rails. It is a twist-lock bay: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.

Owners of the GT1SHTXMQ02 report the same friction points: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. One more anchor for the parts search: the EDR6D1 cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike. Revision 02 changed trim details, not the water circuit; order with confidence by model stem.

Reading the GT1SHTXMQ02 model code — what the digits tell you

The GT1SHTXMQ02 decodes to about 2003-2007 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify. Cross-checking by chassis pays off here: whatever the door count, the cartridge answer for this chassis is the EDR6D1 family.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GT1SHTXMQ02 filter questions

Whirlpool GT1SHTXMQ02: how do I clear the change-filter light?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the GT1SHTXMQ02 owner’s manual page for filter status.

Whirlpool GT1SHTXMQ02: bypass plug needed without a filter?

No bypass needed: the EDR6D1 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR6D1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GT1SHTXMQ02?

Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR6D1 cartridge

This bay takes the OEM EDR6D1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →