HomeRefrigerator Water FiltersWhirlpoolGS6SHAXLQ01

GS6SHAXLQ01
Exact-Fit Model Guide

Water Filter for the Whirlpool GS6SHAXLQ01 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GS6SHAXLQ01 replacement water filter cartridge
Replacement cartridge for this model
GS6SHAXLQ01 · Quick Facts
TYPE
refrigerator
YEARS MADE
2002-2006
FILTER LOCATION
at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
GS6SHAXLQ01 · Quick Facts
Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2002-2006
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for GS6SHAXLQ01. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

GS6SHAXLQ01 specifics — where the filter actually lives

Where the filter actually lives: at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear — usually a kneeling-height or shoulder-height swap, not a teardown. Mechanically the GS6SHAXLQ01 uses a twist-in cartridge: seat the cartridge against the o-ring, quarter-turn clockwise, and let the keyed flange do the aligning for you.

The recurring owner notes: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. The GS prefix is the tell: count on GS to place this unit among side-by-side family builds; that placement carries the water-path geometry with it. Read the 01 ending as a revision marker — Whirlpool used it for running changes, none of which touched the EDR5RXD1 bay.

GS vs GSS — what the prefix tells you

The GS prefix sits next to GSS in the catalog and the split is cabinet mission: GS answers to side-by-side family; GSS answers to side-by-side; the water-filter answer is shared. By model-code convention the GS6SHAXLQ01 falls around 2002 to 2006; treat the dates as a working estimate, not record.

Swap it in 5 minutes

Installing the replacement water filter in the GS6SHAXLQ01
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GS6SHAXLQ01 filter questions

GS6SHAXLQ01 filter light will not turn off — what is the reset step?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the GS6SHAXLQ01 owner’s manual page for filter status.

Does the Whirlpool GS6SHAXLQ01 need a bypass plug when the filter is out?

No — the EDR5RXD1 bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GS6SHAXLQ01?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →