HomeRefrigerator Water FiltersWhirlpoolGS2SHAXNQ00

GS2SHAXNQ00
Exact-Fit Model Guide

Water Filter for the Whirlpool GS2SHAXNQ00 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GS2SHAXNQ00 replacement water filter cartridge
Replacement cartridge for this model
GS2SHAXNQ00 · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
in the lower fresh-food zone in most side-by-side layouts, knee height or below
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
GS2SHAXNQ00 · Quick Facts
Filter locationin the lower fresh-food zone in most side-by-side layouts, knee height or below
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for GS2SHAXNQ00. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

GS2SHAXNQ00 specifics — where the filter actually lives

Where the filter actually lives: in the lower fresh-food zone in most side-by-side layouts, knee height or below, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the GS2SHAXNQ00 uses a twist-in cartridge: release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.

Two quirks worth knowing before you order: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. The badge reads GS2SHAXNQ00, but the chassis reads GS: generally a side-by-side family machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. Read the 00 ending as a revision marker — Whirlpool used it for running changes, none of which touched the EDR5RXD1 bay.

GS vs GSS — what the prefix tells you

Two prefixes, two missions: GS marks side-by-side family builds and GSS marks side-by-side builds. Cross-checking the prefix before ordering is faster than returning the wrong cartridge. One more anchor for the parts search: this chassis drinks from the EDR5RXD1 family, one of the most cross-referenced cartridges in the Whirlpool catalog.

Swap it in 5 minutes

Installing the replacement water filter in the GS2SHAXNQ00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GS2SHAXNQ00 filter questions

How to reset the water filter indicator: Whirlpool GS2SHAXNQ00?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the GS2SHAXNQ00 manual’s filter section has the exact control for your trim.

Whirlpool GS2SHAXNQ00: bypass plug needed without a filter?

The bay self-seals: with no cartridge the GS2SHAXNQ00 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GS2SHAXNQ00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →