Water Filter for the Whirlpool GR2SHTXMS01 (EDR6D1)

Your Whirlpool refrigerator takes the EDR6D1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GR2SHTXMS01 · Quick Facts

TYPE

refrigerator

YEARS MADE

2003-2007

FILTER LOCATION

in the fresh-food compartment — exact spot varies by dispenser layout

FILTER SLOT

EveryDrop Filter 6 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

gr2shtxms00

Every cartridge that fits this model — pulled live from the catalogue:

Compatible cartridges verified for this model

We cross-checked the GR2SHTXMS01 against every cartridge family that fits its bay. ClearFit versions are on the way — get notified when they land, or find your exact fit now.

Find filters for your fridge →

✓

Verified fit for GR2SHTXMS01. Cross-checked against Whirlpool service documentation — this model family uses the EDR6D1 bay with no chip or bypass restrictions.

Not your model? Check the finder →

GR2SHTXMS01 specifics — where the filter actually lives

The GR2SHTXMS01 carries its water filter in the fresh-food compartment — exact spot varies by dispenser layout, a deliberate placement that keeps the swap away from the door seals and drawer rails. This is a twist-style bay, the friendlier design: the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.

Field notes: keep a folded towel under the bay before you open it; the line holds a cup of water even with the valve shut. Under the cabinet differences one thing holds: the EDR6D1 line — which is why fit listings key on chassis rather than door style. Read the 01 ending as a revision marker — Whirlpool used it for running changes, none of which touched the EDR6D1 bay.

Reading the GR2SHTXMS01 model code — what the digits tell you

Working from the model code, the GR2SHTXMS01 lands somewhere around 2003-2007; treat the window as approximate. The trim walk never reaches the plumbing: every trim of this model resolves to the EDR6D1 family, OEM and certified alternative alike.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GR2SHTXMS01 filter questions

Whirlpool GR2SHTXMS01: how do I clear the change-filter light?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the GR2SHTXMS01 owner’s manual page for filter status.

Can I run the Whirlpool GR2SHTXMS01 with no cartridge installed?

No bypass needed: the EDR6D1 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR6D1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GR2SHTXMS01?

Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR6D1 cartridge

This bay takes the OEM EDR6D1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →