Water Filter for the Whirlpool GR2SHTXML01

GR2SHTXML01 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it in the fresh-food compartment — exact spot varies by dispenser layout, the same estate every refrigerator in this family uses. Mechanically it is a quarter-turn twist-in seat: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.

Field notes: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. What pins the parts choice down is the media line: the EDR6D1 line — which is why fit listings key on chassis rather than door style. Revision 01 changed trim details, not the water circuit; order with confidence by model stem.

Reading the GR2SHTXML01 model code — what the digits tell you

The GR2SHTXML01 decodes to about 2003-2007 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify. Order by cartridge, not by cabinet: this generation runs on the EDR6D1 line across every cabinet variant.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.