Water Filter for the Whirlpool GR2FHTXVL01 (EDR6D1)

Your Whirlpool refrigerator takes the EDR6D1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GR2FHTXVL01 · Quick Facts

TYPE

refrigerator

YEARS MADE

2008-2012

FILTER LOCATION

in the fresh-food compartment — exact spot varies by dispenser layout

FILTER SLOT

EveryDrop Filter 6 bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

gr2fhtxvl00

GR2FHTXVL01 · Quick Facts

Filter locationin the fresh-food compartment — exact spot varies by dispenser layout

Filter slotEveryDrop Filter 6 bay

Replace everyEvery 6 months

Years made2008-2012

Also branded asgr2fhtxvl00

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GR2FHTXVL01. Cross-checked against Whirlpool service documentation — this model family uses the EDR6D1 bay with no chip or bypass restrictions.

Not your model? Check the finder →

GR2FHTXVL01 specifics — where the filter actually lives

On the GR2FHTXVL01, the cartridge in the fresh-food compartment — exact spot varies by dispenser layout, the same estate every refrigerator in this family uses. Mechanically the GR2FHTXVL01 uses a twist-in cartridge: align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.

Before you click buy, two things: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. Whatever the badge on the door says, the parts reality is the EDR6D1 cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike. The -01 tail tracks the revision ladder — each rung shares the identical EDR6D1 bay.

Reading the GR2FHTXVL01 model code — what the digits tell you

The GR2FHTXVL01 code suggests roughly 2008 to 2012 production — approximately right, which is all a parts search needs. Order by cartridge, not by cabinet: the EDR6D1 cartridge is the one constant across the model run.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GR2FHTXVL01 filter questions

How to reset the water filter indicator: Whirlpool GR2FHTXVL01?

Hold the filter-reset control a few seconds after seating the new cartridge; placements vary by control panel, and the GR2FHTXVL01 manual’s filter-status page has the exact spot.

Running the GR2FHTXVL01 with an empty filter bay — does it need a cap?

No — run it empty if you like; the EDR6D1 bay needs no bypass plug, it simply passes water through untreated.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR6D1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GR2FHTXVL01?

Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR6D1 cartridge

This bay takes the OEM EDR6D1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →