HomeRefrigerator Water FiltersWhirlpoolGI7FVCXWA00

GI7FVCXWA00
Exact-Fit Model Guide

Water Filter for the Whirlpool GI7FVCXWA00 (EDR4RXD1)

Your Whirlpool refrigerator takes the EDR4RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GI7FVCXWA00 replacement water filter cartridge
Replacement cartridge for this model
GI7FVCXWA00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2009-2013
FILTER LOCATION
in the fresh-food compartment, placement dependent on the dispenser package
FILTER SLOT
EveryDrop Filter 4 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
GI7FVCXWA00 · Quick Facts
Filter locationin the fresh-food compartment, placement dependent on the dispenser package
Filter slotEveryDrop Filter 4 bay
Replace everyEvery 6 months
Years made2009-2013
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for GI7FVCXWA00. Cross-checked against Whirlpool service documentation — this model family uses the EDR4RXD1 bay with no chip or bypass restrictions.

GI7FVCXWA00 specifics — where the filter actually lives

On the GI7FVCXWA00, the cartridge in the fresh-food compartment, placement dependent on the dispenser package, a spot that survives trim changes across the refrigerator run. It is a twist-lock bay: align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.

Field notes: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. The constant across every trim of this machine is the cartridge line — the GI7FVCXWA00 shares its water path with the whole EDR4RXD1 generation — the cartridge is the common denominator, not the door count. Suffix 00 = production revision; filtration hardware was not part of the revision cycle.

Reading the GI7FVCXWA00 model code — what the digits tell you

Model-code reading puts the GI7FVCXWA00 at roughly 2009 to 2013 — treat that as approximately right, not a production guarantee. Shopping shorthand for this model: trim codes shuffle doors and finishes; the EDR4RXD1 cartridge family is the fixed point.

Swap it in 5 minutes

Installing the replacement water filter in the GI7FVCXWA00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GI7FVCXWA00 filter questions

Whirlpool GI7FVCXWA00: how do I clear the change-filter light?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the GI7FVCXWA00 owner’s manual lists the button location for your control panel.

Can I run the Whirlpool GI7FVCXWA00 with no cartridge installed?

You can, but unfiltered — the EDR4RXD1 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR4RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GI7FVCXWA00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR4RXD1 cartridge

This bay takes the OEM EDR4RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →