Home › Refrigerator Water Filters › Whirlpool › GI6SDRXXY00
Water Filter for the Whirlpool GI6SDRXXY00 (EDR4RXD1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
GI6SDRXXY00 specifics — where the filter actually lives
Finding the bay is the easy part — this chassis puts it in the fresh-food compartment, placement dependent on the dispenser package, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the GI6SDRXXY00 uses a twist-in cartridge: the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.
Before you click buy, two things: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. One more anchor for the parts search: the GI6SDRXXY00 shares its water path with the whole EDR4RXD1 generation — the cartridge is the common denominator, not the door count. A -00 style suffix means running production revisions; filter fit stayed constant across the whole run.
Reading the GI6SDRXXY00 model code — what the digits tell you
Model-code reading puts the GI6SDRXXY00 at roughly 2010 to 2014 — treat that as approximately right, not a production guarantee. The trim walk never reaches the plumbing: the EDR4RXD1 cartridge is the one constant across the model run.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
GI6SDRXXY00 filter questions
Filter light reset on the Whirlpool GI6SDRXXY00 — how?
Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the GI6SDRXXY00 owner’s manual lists the button location for your control panel.
Is a bypass plug required for the GI6SDRXXY00 when the cartridge is removed?
You can, but unfiltered — the EDR4RXD1 bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.
Are off-brand filters safe for a Whirlpool refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR4RXD1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my GI6SDRXXY00?
Every six months or at the rated gallon capacity, whichever comes first — the EDR4RXD1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| Cartridge | OEM EDR4RXD1 | RECOMMENDEDUKF8001 Replacement Water Filter · 1-Pack – ClearFit | EDR4RXD1 EveryDrop Filter 4 Replacement · 1-Pack – ClearFit | UKF8001 Replacement Water Filter · 3-Pack – ClearFit |
|---|---|---|---|---|
| Price | OEM list | $17.99 | $17.99 | $44.97 |
| Verified fit | ✓ the bay cartridge | View & buy → | View & buy → | View & buy → |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →