Home › Refrigerator Water Filters › Whirlpool › GD25SHAXLT01-WASTER

GD25SHAXLT01-WASTER
Exact-Fit Model Guide

Water Filter for the Whirlpool GD25SHAXLT01-WASTER (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

GD25SHAXLT01-WASTER replacement water filter cartridge
Replacement cartridge for this model
GD25SHAXLT01-WASTER · Quick Facts
TYPE
refrigerator
YEARS MADE
2010-2014
FILTER LOCATION
in the fresh-food compartment — exact spot varies by dispenser layout
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
—
GD25SHAXLT01-WASTER · Quick Facts
Filter locationin the fresh-food compartment — exact spot varies by dispenser layout
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2010-2014
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for GD25SHAXLT01-WASTER. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

GD25SHAXLT01-WASTER specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it in the fresh-food compartment — exact spot varies by dispenser layout, a spot that survives trim changes across the refrigerator run. The seat is a twist-in design — the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.

Order-day practicalities: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. Under the cabinet differences one thing holds: the EDR5RXD1 line — which is why fit listings key on chassis rather than door style. Finish codes such as ER change the look, not the plumbing — order the cartridge by model, ignore the finish letter.

Reading the GD25SHAXLT01-WASTER model code — what the digits tell you

By model-code convention the GD25SHAXLT01-WASTER falls around 2010-2014; treat the dates as a working estimate, not record. Order by cartridge, not by cabinet: every variant of this chassis locks onto the EDR5RXD1 line — that is the whole parts story.

Swap it in 5 minutes

Installing the replacement water filter in the GD25SHAXLT01-WASTER
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

GD25SHAXLT01-WASTER filter questions

Whirlpool GD25SHAXLT01-WASTER: how do I clear the change-filter light?

Lock in the new cartridge first, then hold the reset control for a few seconds — the GD25SHAXLT01-WASTER manual documents the button for each panel variant.

Whirlpool GD25SHAXLT01-WASTER: bypass plug needed without a filter?

No bypass needed: the EDR5RXD1 bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my GD25SHAXLT01-WASTER?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →