Home › Refrigerator Water Filters › Whirlpool › G9IXEFMWB02

G9IXEFMWB02
Exact-Fit Model Guide

Water Filter for the Whirlpool G9IXEFMWB02 (EDR6D1)

Your Whirlpool refrigerator takes the EDR6D1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

G9IXEFMWB02 replacement water filter cartridge
Replacement cartridge for this model
G9IXEFMWB02 · Quick Facts
TYPE
refrigerator
YEARS MADE
2009-2013
FILTER LOCATION
in the fresh-food compartment — exact spot varies by dispenser layout
FILTER SLOT
EveryDrop Filter 6 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
g9ixefmwb00, g9ixefmwb01
G9IXEFMWB02 · Quick Facts
Filter locationin the fresh-food compartment — exact spot varies by dispenser layout
Filter slotEveryDrop Filter 6 bay
Replace everyEvery 6 months
Years made2009-2013
Also branded asg9ixefmwb00, g9ixefmwb01
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for G9IXEFMWB02. Cross-checked against Whirlpool service documentation — this model family uses the EDR6D1 bay with no chip or bypass restrictions.

G9IXEFMWB02 specifics — where the filter actually lives

Where the filter actually lives: in the fresh-food compartment — exact spot varies by dispenser layout, the same estate every refrigerator in this family uses. It is a twist-lock bay: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.

Before you click buy, two things: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. Under the cabinet differences one thing holds: the EDR6D1 line — which is why fit listings key on chassis rather than door style. Suffix 02 = production revision; filtration hardware was not part of the revision cycle.

Reading the G9IXEFMWB02 model code — what the digits tell you

Catalog convention puts the G9IXEFMWB02 near 2009 to 2013 — an approximation, useful for bracketing the cartridge era only. Order by cartridge, not by cabinet: fit charts key on the EDR6D1 cartridge family rather than the door configuration, so trim differences never change the order.

Swap it in 5 minutes

Installing the replacement water filter in the G9IXEFMWB02
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

G9IXEFMWB02 filter questions

Reset procedure for the change-filter alert on the G9IXEFMWB02?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the G9IXEFMWB02 owner’s manual lists the button location for your control panel.

Running the G9IXEFMWB02 with an empty filter bay — does it need a cap?

The bay self-seals: with no cartridge the G9IXEFMWB02 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR6D1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my G9IXEFMWB02?

Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR6D1 cartridge

This bay takes the OEM EDR6D1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →