Home › Refrigerator Water Filters › Whirlpool › ET9FHTXMQ03
Water Filter for the Whirlpool ET9FHTXMQ03 (EDR6D1)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
ET9FHTXMQ03 specifics — where the filter actually lives
On the ET9FHTXMQ03, the cartridge inside the fresh-food cavity, position varying with dispenser spec, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the ET9FHTXMQ03 uses a twist-in cartridge: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.
Two quirks worth knowing before you order: expect dribble at the bay on removal even with the supply off, and remember the indicator will not self-clear — hold the reset control. The constant across every trim of this machine is the cartridge line — the EDR6D1 cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike. The 03 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.
Reading the ET9FHTXMQ03 model code — what the digits tell you
The ET9FHTXMQ03 code suggests roughly 2003-2007 production — approximately right, which is all a parts search needs. The model code varies with trim, but the parts logic does not: whatever the door count, the cartridge answer for this chassis is the EDR6D1 family.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
ET9FHTXMQ03 filter questions
Whirlpool ET9FHTXMQ03: how do I clear the change-filter light?
With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the ET9FHTXMQ03 manual’s filter section has the exact control for your trim.
Whirlpool ET9FHTXMQ03: bypass plug needed without a filter?
No cap needed — the EDR6D1 bay passes water unfiltered while empty; it does not leak, it just skips filtration.
Are off-brand filters safe for a Whirlpool refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM EDR6D1 cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my ET9FHTXMQ03?
Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
This bay takes the OEM EDR6D1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.
Check every filter that fits →This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →