HomeRefrigerator Water FiltersWhirlpoolET1FHTXMQ04

ET1FHTXMQ04
Exact-Fit Model Guide

Water Filter for the Whirlpool ET1FHTXMQ04 (EDR6D1)

Your Whirlpool refrigerator takes the EDR6D1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

ET1FHTXMQ04 replacement water filter cartridge
Replacement cartridge for this model
ET1FHTXMQ04 · Quick Facts
TYPE
refrigerator
YEARS MADE
2003-2007
FILTER LOCATION
inside the fresh-food cavity, position varying with dispenser spec
FILTER SLOT
EveryDrop Filter 6 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
et1fhtxmq00, et1fhtxmq01, et1fhtxmq02, et1fhtxmq03
ET1FHTXMQ04 · Quick Facts
Filter locationinside the fresh-food cavity, position varying with dispenser spec
Filter slotEveryDrop Filter 6 bay
Replace everyEvery 6 months
Years made2003-2007
Also branded aset1fhtxmq00, et1fhtxmq01, et1fhtxmq02, et1fhtxmq03
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for ET1FHTXMQ04. Cross-checked against Whirlpool service documentation — this model family uses the EDR6D1 bay with no chip or bypass restrictions.

ET1FHTXMQ04 specifics — where the filter actually lives

On the ET1FHTXMQ04, the cartridge inside the fresh-food cavity, position varying with dispenser spec, the same estate every refrigerator in this family uses. It is a twist-lock bay: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.

The small print owners learn the hard way: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. Whatever the badge on the door says, the parts reality is the ET1FHTXMQ04 shares its water path with the whole EDR6D1 generation — the cartridge is the common denominator, not the door count. Read the 04 ending as a revision marker — Whirlpool used it for running changes, none of which touched the EDR6D1 bay.

Reading the ET1FHTXMQ04 model code — what the digits tell you

Model-code reading puts the ET1FHTXMQ04 at roughly 2003 to 2007 — treat that as approximately right, not a production guarantee. Shopping shorthand for this model: this generation runs on the EDR6D1 line across every cabinet variant.

Swap it in 5 minutes

Installing the replacement water filter in the ET1FHTXMQ04
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

ET1FHTXMQ04 filter questions

Filter light reset on the Whirlpool ET1FHTXMQ04 — how?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the ET1FHTXMQ04 owner’s manual lists the button location for your control panel.

Whirlpool ET1FHTXMQ04: bypass plug needed without a filter?

The bay self-seals: with no cartridge the ET1FHTXMQ04 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR6D1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my ET1FHTXMQ04?

Every six months or at the rated gallon capacity, whichever comes first — the EDR6D1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR6D1 cartridge

This bay takes the OEM EDR6D1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →