HomeRefrigerator Water FiltersWhirlpoolED7FHEXMT00

ED7FHEXMT00
Exact-Fit Model Guide

Water Filter for the Whirlpool ED7FHEXMT00 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

ED7FHEXMT00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2003-2007
FILTER LOCATION
in the fresh-food compartment — exact spot varies by dispenser layout
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
ED7FHEXMT00 · Quick Facts
Filter locationin the fresh-food compartment — exact spot varies by dispenser layout
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2003-2007
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for ED7FHEXMT00. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

ED7FHEXMT00 specifics — where the filter actually lives

The filter bay on the ED7FHEXMT00 in the fresh-food compartment — exact spot varies by dispenser layout — usually a kneeling-height or shoulder-height swap, not a teardown. Mechanically the ED7FHEXMT00 uses a twist-in cartridge: release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.

Field notes: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. What pins the parts choice down is the media line: this chassis drinks from the EDR5RXD1 family, one of the most cross-referenced cartridges in the Whirlpool catalog. The 00 suffix here is a revision index, not a different machine — trim and door hardware can shift between revisions, the filter bay does not.

Reading the ED7FHEXMT00 model code — what the digits tell you

Catalog convention puts the ED7FHEXMT00 near 2003 to 2007 — an approximation, useful for bracketing the cartridge era only. Hold this constant while shopping: the ED7FHEXMT00 and its siblings all drink from the EDR5RXD1 line, which keeps the parts search short.

Swap it in 5 minutes

Installing the water filter in the ED7FHEXMT00 (EDR5RXD1 bay)
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

ED7FHEXMT00 filter questions

Whirlpool ED7FHEXMT00: how do I clear the change-filter light?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the ED7FHEXMT00 manual’s filter section has the exact control for your trim.

Does the Whirlpool ED7FHEXMT00 need a bypass plug when the filter is out?

The bay self-seals: with no cartridge the ED7FHEXMT00 still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my ED7FHEXMT00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

GUIDE · 4,400 SEARCHES/MO

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

GUIDE · 2,300 SEARCHES/MO

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM · 27,100 SEARCHES/MO

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →