Home › Refrigerator Water Filters › Whirlpool › ED5LHAXMT10

ED5LHAXMT10
Exact-Fit Model Guide

Water Filter for the Whirlpool ED5LHAXMT10 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

ED5LHAXMT10 replacement water filter cartridge
Replacement cartridge for this model
ED5LHAXMT10 · Quick Facts
TYPE
refrigerator
YEARS MADE
2003-2007
FILTER LOCATION
in the fresh-food compartment — exact spot varies by dispenser layout
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
ed5lhaxmt00
ED5LHAXMT10 · Quick Facts
Filter locationin the fresh-food compartment — exact spot varies by dispenser layout
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2003-2007
Also branded ased5lhaxmt00
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for ED5LHAXMT10. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

ED5LHAXMT10 specifics — where the filter actually lives

On the ED5LHAXMT10, the cartridge in the fresh-food compartment — exact spot varies by dispenser layout, the same estate every refrigerator in this family uses. Mechanically it is a quarter-turn twist-in seat: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.

Two quirks worth knowing before you order: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. One more anchor for the parts search: this chassis drinks from the EDR5RXD1 family, one of the most cross-referenced cartridges in the Whirlpool catalog. Revision 10 changed trim details, not the water circuit; order with confidence by model stem.

Reading the ED5LHAXMT10 model code — what the digits tell you

Model-code reading puts the ED5LHAXMT10 at roughly 2003-2007 — treat that as approximately right, not a production guarantee. The trim walk never reaches the plumbing: model-code suffixes track cosmetics; the EDR5RXD1 fit is invariant across them.

Swap it in 5 minutes

Installing the replacement water filter in the ED5LHAXMT10
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

ED5LHAXMT10 filter questions

How to reset the water filter indicator: Whirlpool ED5LHAXMT10?

Lock in the new cartridge first, then hold the reset control for a few seconds — the ED5LHAXMT10 manual documents the button for each panel variant.

Running the ED5LHAXMT10 with an empty filter bay — does it need a cap?

No cap needed — the EDR5RXD1 bay passes water unfiltered while empty; it does not leak, it just skips filtration.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my ED5LHAXMT10?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →