Water Filter for the Whirlpool ED27QFXHB02 (EDR5RXD1)

ED27QFXHB02 specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it inside the fresh-food cavity, position varying with dispenser spec — usually a kneeling-height or shoulder-height swap, not a teardown. This is a twist-style bay, the friendlier design: a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.

Practical notes from the install forums: a stubborn first twist when the old o-ring has set, and a change-filter light that will not clear itself until you hold the reset. What pins the parts choice down is the media line: the EDR5RXD1 media line; that is the anchor every compatible listing hangs from. That trailing 02 is the revision counter: refrigerator chassis revisions share one water path, so the cartridge order never changes with it.

Reading the ED27QFXHB02 model code — what the digits tell you

The ED27QFXHB02 decodes to about 2018-2022 by catalog convention — close enough to bracket the cartridge generation, not close enough to certify. Fit listings tell the same story: fit charts key on the EDR5RXD1 cartridge family rather than the door configuration, so trim differences never change the order.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

ED27QFXHB02 filter questions