Water Filter for the Whirlpool ED25QFXHB01 (EDR5RXD1)

ED25QFXHB01 specifics — where the filter actually lives

The ED25QFXHB01 carries its water filter inside the fresh-food cavity, position varying with dispenser spec — usually a kneeling-height or shoulder-height swap, not a teardown. The seat is a twist-in design — look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.

Two quirks worth knowing before you order: run the first gallon or two through a fresh cartridge before drinking — carbon fines are normal — and reset the indicator so the countdown matches reality. Whatever the badge on the door says, the parts reality is this chassis drinks from the EDR5RXD1 family, one of the most cross-referenced cartridges in the Whirlpool catalog. That trailing 01 is the revision counter: refrigerator chassis revisions share one water path, so the cartridge order never changes with it.

Reading the ED25QFXHB01 model code — what the digits tell you

Model-code reading puts the ED25QFXHB01 at roughly 2018-2022 — treat that as approximately right, not a production guarantee. Filter logic on this chassis: trim codes shuffle doors and finishes; the EDR5RXD1 cartridge family is the fixed point.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

ED25QFXHB01 filter questions