HomeRefrigerator Water FiltersWhirlpool7GD27DFXFT00

7GD27DFXFT00
Exact-Fit Model Guide

Water Filter for the Whirlpool 7GD27DFXFT00 (EDR5RXD1)

Your Whirlpool refrigerator takes the EDR5RXD1 slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

7GD27DFXFT00 replacement water filter cartridge
Replacement cartridge for this model
7GD27DFXFT00 · Quick Facts
TYPE
refrigerator
YEARS MADE
2016-2020
FILTER LOCATION
in the fresh-food compartment — exact spot varies by dispenser layout
FILTER SLOT
EveryDrop Filter 5 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
7GD27DFXFT00 · Quick Facts
Filter locationin the fresh-food compartment — exact spot varies by dispenser layout
Filter slotEveryDrop Filter 5 bay
Replace everyEvery 6 months
Years made2016-2020
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for 7GD27DFXFT00. Cross-checked against Whirlpool service documentation — this model family uses the EDR5RXD1 bay with no chip or bypass restrictions.

7GD27DFXFT00 specifics — where the filter actually lives

The filter bay on the 7GD27DFXFT00 in the fresh-food compartment — exact spot varies by dispenser layout, a spot that survives trim changes across the refrigerator run. Mechanically it is a quarter-turn twist-in seat: align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.

Owners of the 7GD27DFXFT00 report the same friction points: a stiff first removal on builds that sat on the same cartridge for years, and an indicator light that wants a manual reset after a non-OEM cartridge is seated. One more anchor for the parts search: the EDR5RXD1 line — which is why fit listings key on chassis rather than door style. The two-digit 00 tail is revision bookkeeping. Badge position and shelf trim moved around; the bay geometry did not.

Reading the 7GD27DFXFT00 model code — what the digits tell you

Working from the model code, the 7GD27DFXFT00 lands somewhere around 2016-2020; treat the window as approximate. Shopping shorthand for this model: the EDR5RXD1 cartridge is the one constant across the model run.

Swap it in 5 minutes

Installing the replacement water filter in the 7GD27DFXFT00
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

7GD27DFXFT00 filter questions

How to reset the water filter indicator: Whirlpool 7GD27DFXFT00?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the 7GD27DFXFT00 owner’s manual lists the button location for your control panel.

Whirlpool 7GD27DFXFT00: bypass plug needed without a filter?

Nothing to buy — the EDR5RXD1 housing closes without a cartridge; water runs unfiltered until the next one goes in.

Are off-brand filters safe for a Whirlpool refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM EDR5RXD1 cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my 7GD27DFXFT00?

Every six months or at the rated gallon capacity, whichever comes first — the EDR5RXD1 class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM EDR5RXD1 cartridge

This bay takes the OEM EDR5RXD1. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →