HomeRefrigerator Water FiltersSamsungTADA29-00003B

TADA29-00003B
Exact-Fit Model Guide

Water Filter for the Samsung TADA29-00003B (DA29-00003G)

Your Samsung refrigerator takes the DA29-00003G slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

TADA29-00003B · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
in the fresh-food compartment, placement dependent on the dispenser package
FILTER SLOT
HAF-CIN/DA29 bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
TADA29-00003B · Quick Facts
Filter locationin the fresh-food compartment, placement dependent on the dispenser package
Filter slotHAF-CIN/DA29 bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for TADA29-00003B. Cross-checked against Samsung service documentation — this model family uses the DA29-00003G bay with no chip or bypass restrictions.

TADA29-00003B specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it in the fresh-food compartment, placement dependent on the dispenser package, so expect to clear one shelf edge before you have working room. The seat is a push-fit design: the alignment is keyed, so it only goes in one way, and hand pressure is all the force required.

Two quirks worth knowing before you order: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. One more anchor for the parts search: this chassis drinks from the DA2900003G family, one of the most cross-referenced cartridges in the Samsung catalog. Trailing letters like 3B denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

Reading the TADA29-00003B model code — what the digits tell you

Capacity 29 cu ft: a mid-to-full-size cabinet whose dispenser traffic sets the realistic change cadence. The trim walk never reaches the plumbing: every trim of this model resolves to the DA2900003G family, OEM and certified alternative alike.

Swap it in 5 minutes

  • Pull the old cartridge straight out of the header — expect a small spill, not a flood.
  • Align the new cartridge with the keyed slot; it only goes in one orientation.
  • Push the cartridge home until the retention latch clicks.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

TADA29-00003B filter questions

Reset procedure for the change-filter alert on the TADA29-00003B?

Lock in the new cartridge first, then hold the reset control for a few seconds — the TADA29-00003B manual documents the button for each panel variant.

Running the TADA29-00003B with an empty filter bay — does it need a cap?

No — the DA2900003G bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a Samsung refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM DA2900003G cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my TADA29-00003B?

Every six months or at the rated gallon capacity, whichever comes first — the DA2900003G class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM DA29-00003G cartridge

This bay takes the OEM DA29-00003G. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

GUIDE · 4,400 SEARCHES/MO

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

GUIDE · 2,300 SEARCHES/MO

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM · 27,100 SEARCHES/MO

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →