EDR2RXD1 Water Filter
The short answer on the EDR2RXD1
The EDR2RXD1 cartridge fits whirlpool refrigerators using the matching bay. No claim data in our evidence file. Replacement interval: ~6 months. This page lists every verified model, the honest certification picture, and what the cartridge should cost.
Verified fit: 338 refrigerator models in our cross-checked library. Install time: 5 minutes, no tools. This page is part-number specific — for the model-page view (where the filter lives on your exact fridge), follow any link in the compatible-models table below.
What an EDR2RXD1 should cost
We do not print an OEM list price for the EDR2RXD1 — our price file has no captured listing for it, and a guessed anchor is worse than none. Check the manufacturer's own parts store for the genuine price; third-party compatibles cluster at $8–15 per cartridge (mostly NSF/ANSI 42 only) with a premium 42+53 tier above them.
Refrigerators that take the EDR2RXD1
Model number on your fridge is on the plate inside the fresh-food compartment. Full list via the brand hub: Whirlpool filter hub.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Check both o-rings sit in their grooves, then fill the new cartridge's top with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the positive stop catches.
- Run 1–2 gallons through the dispenser to flush carbon fines, then hold the filter-reset control about 3 seconds until the status light clears.
What the EDR2RXD1 is actually certified to remove
No NSF claim stated in our evidence file for this part number — check the NSF certified-product listing before relying on any claim.. The honest framing: the two tiers that matter in compatibles are 42-only (taste, chlorine, sediment) and 42+53 (adds tested lead and cyst reduction). Claims are part-number × version facts — NSF listings update with annual re-tests, so re-check the certified-product database before relying on a claim. PFOA/PFOS reduction claims live under NSF/ANSI 53 (P473 protocol), not under 401 — a listing that says otherwise is wrong.
What does the EDR2RXD1 replace?
Replacement path: No claim data in our evidence file. Within a family, buying the newer part number is always the safe choice — older cartridges often physically fit newer bays but cause no-water or error conditions.
Does the EDR2RXD1 water filter have an RFID chip?
None. Only GE's RPWFE line carries an authentication chip; no other mainstream refrigerator cartridge on this site verifies electronically.
How hard is it to install a EDR2RXD1?
A 5 minutes, no-tools job: twist or push the old cartridge out, seat the new one, flush 1–2 gallons to clear carbon fines, then hold the filter reset until the light clears.
Which certification should I look for in a compatible EDR2RXD1?
No NSF claim stated in our evidence file for this part number — check the NSF certified-product listing before relying on any claim.. Third-party compatibles split into two tiers: NSF/ANSI 42 only (taste, chlorine, sediment) and 42 + 53 (adds tested lead and cyst reduction). If a listing does not name the standard, assume 42 only.
Related part numbers & guides
Not sure this is your cartridge?
The model number on the plate inside your fridge (fresh-food compartment, left wall or ceiling) is the ground truth. Match it in the finder and buy with confidence.