Water Filter for the LG LSXS2632 (LT800P)

LSXS2632 specifics — where the filter actually lives

The LSXS2632 carries its water filter at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, a spot that survives trim changes across the LS run. The seat combines push-fit and twist-lock: seat the cartridge, give it the quarter turn, and the bay takes it from there.

Before you click buy, two things: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. The LS in LSXS2632 is doing real work: LS is LG’s own coding for side-by-side machines, and in that format the water path is long enough that a neglected cartridge shows up as flow drop before it shows up as taste. The two-digit 32 tail is revision bookkeeping. Badge position and shelf trim moved around; the bay geometry did not.

LS vs LF — what the prefix tells you

The catalog pairs LS with LF, and the split matters at order time: side-by-side against French-door, respectively. Filter bays rarely care — the media family carries over more often than not. cabinet class 26 cu ft — a box that size leans on the dispenser, so the six-month cartridge interval earns its keep.

Swap it in 5 minutes

• Press the release (if fitted), twist the old cartridge free, and pull it from the header.
• Wet the new cartridge’s o-ring with cold tap water so it seats without dragging.
• Push the cartridge square onto the header, then give it the locking quarter turn.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

LSXS2632 filter questions