Water Filter for the LG LSC27935ST (LT600P)

LSC27935ST specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it low on the fresh-food side or behind the base grille in most side-by-side layouts, a deliberate placement that keeps the swap away from the door seals and drawer rails. Mechanically the LSC27935ST uses a push-and-twist cartridge: press, quarter-turn, finished — the two-step seat keeps the o-ring from dragging on installation.

Order-day practicalities: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. The LS in LSC27935ST is doing real work: LG uses it across the side-by-side range, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts catalog. The ST ending is a finish code — color and handle options, not mechanical ones. Every finish of this chassis takes the same cartridge.

LS vs LF — what the prefix tells you

Prefix families here: LS against LF. side-by-side against French-door, respectively. Filter bays rarely care — the media family carries over more often than not. The digits in the model number read as cabinet capacity (27 cu ft), a decent proxy for how hard the filter works in daily service.

Swap it in 5 minutes

• Press the release (if fitted), twist the old cartridge free, and pull it from the header.
• Wet the new cartridge’s o-ring with cold tap water so it seats without dragging.
• Push the cartridge square onto the header, then give it the locking quarter turn.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

LSC27935ST filter questions