Water Filter for the LG LSC27926SW (LT600P)

LSC27926SW specifics — where the filter actually lives

Where the filter actually lives: low on the fresh-food side or behind the base grille in most side-by-side layouts, so expect to clear one shelf edge before you have working room. It is a push-twist bay — the short locking turn after the press is what keeps the seal honest between changes.

The recurring owner notes: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. The LS in LSC27926SW is doing real work: LS is LG’s own coding for side-by-side machines, and in that format the water path is long enough that a neglected cartridge shows up as flow drop before it shows up as taste. The SW tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

LS vs LF — what the prefix tells you

Catalog shorthand: side-by-side versus French-door. Both generations draw from the same cartridge pool, so the prefix is a fit-check, not a barrier. 27 cu ft of cabinet — the dispenser sees heavy traffic at that size, and heavy traffic ages cartridges faster.

Swap it in 5 minutes

• Press the release (if fitted), twist the old cartridge free, and pull it from the header.
• Wet the new cartridge’s o-ring with cold tap water so it seats without dragging.
• Push the cartridge square onto the header, then give it the locking quarter turn.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

LSC27926SW filter questions