Water Filter for the LG LRSC26910SW (LT600P)

LRSC26910SW specifics — where the filter actually lives

The filter bay on the LRSC26910SW in the fresh-food compartment, placement dependent on the dispenser package — usually a kneeling-height or shoulder-height swap, not a teardown. It is a push-twist bay — the cartridge locks with a short rotation after seating; if it rotates freely, it is not seated.

Before you click buy, two things: expect dribble at the bay on removal even with the supply off, and remember the indicator will not self-clear — hold the reset control. What pins the parts choice down is the media line: the LT600P cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike. Finish letter sets like SW never alter the bay; the LT600P line fits the whole set.

Reading the LRSC26910SW model code — what the digits tell you

Cabinet decode: 26 cubic feet — the number that tells you whether this cartridge feeds a family-size dispenser or a compact one. Filter logic on this chassis: the water path is fixed at the LT600P line — that asymmetry is what makes filter shopping simple.

Swap it in 5 minutes

• Press the release (if fitted), twist the old cartridge free, and pull it from the header.
• Wet the new cartridge’s o-ring with cold tap water so it seats without dragging.
• Push the cartridge square onto the header, then give it the locking quarter turn.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

LRSC26910SW filter questions