HomeRefrigerator Water FiltersGEWR14X30264

WR14X30264
Exact-Fit Model Guide

Water Filter for the GE WR14X30264 (XWF)

Your GE refrigerator takes the XWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

WR14X30264 replacement water filter cartridge
Replacement cartridge for this model
WR14X30264 · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
in the fresh-food compartment, placement dependent on the dispenser package
FILTER SLOT
XWF/MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
wr14x30263
WR14X30264 · Quick Facts
Filter locationin the fresh-food compartment, placement dependent on the dispenser package
Filter slotXWF/MWF bay
Replace everyEvery 6 months
Also branded aswr14x30263
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for WR14X30264. Cross-checked against GE service documentation — this model family uses the XWF bay with Note: RFID adjacency: XWF/XWFE replaces XWF only, NOT interchangeable with RPWFE (RFID) – see guide.

WR14X30264 specifics — where the filter actually lives

The filter bay on the WR14X30264 in the fresh-food compartment, placement dependent on the dispenser package — usually a kneeling-height or shoulder-height swap, not a teardown. The seat is a twist-in design — the ears on the cartridge neck are the guide — line them up, lift into the seat, and quarter-turn home.

Two quirks worth knowing before you order: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. Under the cabinet differences one thing holds: the XWF cartridge family is what every fit listing for this chassis resolves to, OEM and certified alternative alike. That trailing 64 is the revision counter: refrigerator chassis revisions share one water path, so the cartridge order never changes with it.

Reading the WR14X30264 model code — what the digits tell you

Capacity 14 cu ft: a mid-to-full-size cabinet whose dispenser traffic sets the realistic change cadence. Hold this constant while shopping: every trim of this model resolves to the XWF family, OEM and certified alternative alike.

Swap it in 5 minutes

Installing the replacement water filter in the WR14X30264
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

WR14X30264 filter questions

WR14X30264 filter light will not turn off — what is the reset step?

Hold the filter-reset control a few seconds after the swap; the status light clears only with a seated cartridge, and the WR14X30264 manual maps the control by panel type.

GE WR14X30264: bypass plug needed without a filter?

No bypass needed: the XWF bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM XWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my WR14X30264?

Every six months or at the rated gallon capacity, whichever comes first — the XWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM XWF cartridge

This bay takes the OEM XWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →