Water Filter for the GE TPS24PPBGBS (MWF)

TPS24PPBGBS specifics — where the filter actually lives

Where the filter actually lives: in the fresh-food compartment, placement dependent on the dispenser package, so expect to clear one shelf edge before you have working room. Mechanically it is a quarter-turn twist-in seat: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.

Practical notes from the install forums: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. Whatever the badge on the door says, the parts reality is the TPS24PPBGBS shares its water path with the whole MWF generation — the cartridge is the common denominator, not the door count. That BS suffix is trim-level shorthand. GE kept the MWF bay common to every finish in the line.

Reading the TPS24PPBGBS model code — what the digits tell you

Cabinet decode: 24 cubic feet — the number that tells you whether this cartridge feeds a family-size dispenser or a compact one. One generation, one cartridge: the TPS24PPBGBS and its siblings all drink from the MWF line, which keeps the parts search short.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

TPS24PPBGBS filter questions