Water Filter for the GE SSL25KFPHBS (MWF)

SSL25KFPHBS specifics — where the filter actually lives

Where the filter actually lives: in the fresh-food compartment — exact spot varies by dispenser layout, so expect to clear one shelf edge before you have working room. The seat is a twist-in design — release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.

Two quirks worth knowing before you order: the change light ignores the new cartridge until you reset it, and the first removal always takes more muscle than the manual implies. The constant across every trim of this machine is the cartridge line — this chassis drinks from the MWF family, one of the most cross-referenced cartridges in the GE catalog. Trailing letters like BS denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

Reading the SSL25KFPHBS model code — what the digits tell you

The two digits after the letters are the cabinet size: this is a 25 cu ft refrigerator, which sets how much dispenser work the cartridge does between changes. One generation, one cartridge: every variant of this chassis locks onto the MWF line — that is the whole parts story.

Swap it in 5 minutes

• Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
• Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
• Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
• Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

SSL25KFPHBS filter questions