HomeRefrigerator Water FiltersGEPYE23PSDSS

PYE23PSDSS
Exact-Fit Model Guide

Water Filter for the GE PYE23PSDSS (RPWFE)

Your GE refrigerator takes the RPWFE slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PYE23PSDSS · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
inside the fresh-food cavity, position varying with dispenser spec
FILTER SLOT
RPWFE bay (RFID)
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PYE23PSDSS · Quick Facts
Filter locationinside the fresh-food cavity, position varying with dispenser spec
Filter slotRPWFE bay (RFID)
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PYE23PSDSS. Cross-checked against GE service documentation — this model family uses the RPWFE bay with Note: RFID chip required (GE premium lines) – see compatibility guide.

PYE23PSDSS specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it inside the fresh-food cavity, position varying with dispenser spec, so expect to clear one shelf edge before you have working room. This is a twist-style bay, the friendlier design: no tools, no housing removal, and the cartridge indexes in only one orientation despite looking symmetric.

Field notes: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. The constant across every trim of this machine is the cartridge line — the RPWFE media line; that is the anchor every compatible listing hangs from. The SS tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

Reading the PYE23PSDSS model code — what the digits tell you

The 23 cubic feet in the code is the size class; households that size move enough water that the six-month interval is worth honoring. Hold this constant while shopping: the PYE23PSDSS and its siblings all drink from the RPWFE line, which keeps the parts search short.

Swap it in 5 minutes

  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PYE23PSDSS filter questions

Filter light reset on the GE PYE23PSDSS — how?

Press and hold the reset control until the light clears (a few seconds), with the new cartridge already seated — the PYE23PSDSS owner’s manual lists the button location for your control panel.

Does the GE PYE23PSDSS need a bypass plug when the filter is out?

The RPWFE bay is chip-locked: it expects the RFID signature of that exact cartridge line, so check the compatibility guide before swapping in anything else.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM RPWFE cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PYE23PSDSS?

Every six months or at the rated gallon capacity, whichever comes first — the RPWFE class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM RPWFE cartridge

This bay takes the OEM RPWFE. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

GUIDE · 4,400 SEARCHES/MO

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

GUIDE · 2,300 SEARCHES/MO

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM · 27,100 SEARCHES/MO

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →