HomeRefrigerator Water FiltersGEPSS27NGSBBB

PSS27NGSBBB
Exact-Fit Model Guide

Water Filter for the GE PSS27NGSBBB (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSS27NGSBBB replacement water filter cartridge
Replacement cartridge for this model
PSS27NGSBBB · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
low on the fresh-food side or behind the base grille in most side-by-side layouts
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSS27NGSBBB · Quick Facts
Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSS27NGSBBB. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

PSS27NGSBBB specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it low on the fresh-food side or behind the base grille in most side-by-side layouts, so expect to clear one shelf edge before you have working room. Mechanically it is a quarter-turn twist-in seat: the bay wants the cartridge offered flat, rotated a quarter turn, and nothing more — hand pressure only.

The small print owners learn the hard way: a stubborn first twist when the old o-ring has set, and a change-filter light that will not clear itself until you hold the reset. Decode the plate and the parts question answers itself: PSS is GE’s Profile side-by-side designation proper, and the service literature files every one of these under the same cartridge line. Finish letter sets like BB never alter the bay; the MWF line fits the whole set.

PSS vs GSS — what the prefix tells you

The PSS prefix sits next to GSS in the catalog and the split is cabinet mission: Chassis first: Profile side-by-side (PSS) versus side-by-side (GSS). The shared cartridge line covers both without adaptation. 27 cu ft of cabinet — the dispenser sees heavy traffic at that size, and heavy traffic ages cartridges faster.

Swap it in 5 minutes

Installing the replacement water filter in the PSS27NGSBBB
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSS27NGSBBB filter questions

Clearing the filter status light on a GE PSS27NGSBBB?

The reset is a press-and-hold on the filter control with the cartridge in place; check the PSS27NGSBBB owner’s manual for where that control sits on your panel.

PSS27NGSBBB with no water filter installed — safe, or does it need a bypass?

The bay self-seals: with no cartridge the PSS27NGSBBB still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSS27NGSBBB?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →