Water Filter for the GE PSS27NGPBWW
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
PSS27NGPBWW specifics — where the filter actually lives
Finding the bay is the easy part — this chassis puts it behind the lower fresh-food trim or base grille in most side-by-side layouts, the same estate every Profile side-by-side refrigerator in this family uses. It is a twist-lock bay: look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.
Owners of the PSS27NGPBWW report the same friction points: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. Decode the plate and the parts question answers itself: GE built these as Profile side-by-side machines, and the filter bay inherits the geometry that implies, including where the dispenser feed runs. That WW suffix is trim-level shorthand. GE kept the MWF bay common to every finish in the line.
PSS vs GSS — what the prefix tells you
The PSS/GSS pair divides this family by layout — Profile side-by-side on the PSS side, side-by-side on the GSS side — the parts catalog runs the same cartridge across both. Capacity check: the 27 cubic feet in the code is the box size, and bigger boxes push more water through the same cartridge between swaps.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
How do I reset the filter light on the GE PSS27NGPBWW?
Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the PSS27NGPBWW owner’s manual page for filter status.
Can I run the GE PSS27NGPBWW with no cartridge installed?
No bypass needed: the MWF bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.
Are off-brand filters safe for a GE refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM MWF cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my PSS27NGPBWW?
Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| OEM EveryDrop EDR1RXD1 | RECOMMENDEDClearFit Standard CF-1001 | ClearFit Lead-Shield CF-1001P | |
|---|---|---|---|
| Price / filter | $59.99 | $14.99 | $19.99 |
| NSF 42 (chlorine, taste) | ✓ Certified | ✓ Certified | ✓ Certified |
| NSF 53 (lead, cysts) | ✓ Certified | — Not tested | ✓ 99.2% lead reduction |
| Capacity | 200 gal / 6 mo | 200 gal / 6 mo | 200 gal / 6 mo |
| Filter media | Carbon block | Coconut carbon | Carbon + ion-ex |
| Subscribe & Save | — | ✓ 15% off, cancel anytime | ✓ 15% off |
| Order | Not sold here — $59.99 at EveryDrop | Add to Cart | Add to Cart |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
Also due on this fridge
Second bay · Air filter slot
EveryDrop PAULTRA Air Filter ×2
Fits W10311524 · reduces food odors · replace every 6 months
$35.98
Bundle & save 10%
Full refresh kit — CF-1001 3-pack + PAULTRA ×2
Everything this fridge needs for the next 6 months, one shipment
$64.98
More models using this filter
FFHS2313LSB
FFHS2622MB3
FPSC2278UF8
FRS6LF7FW0
Related guides
GUIDE · 4,400 SEARCHES/MO
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
GUIDE · 2,300 SEARCHES/MO
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM · 27,100 SEARCHES/MO
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →