HomeRefrigerator Water FiltersGEPSS27NGMCBB

PSS27NGMCBB
Exact-Fit Model Guide

Water Filter for the GE PSS27NGMCBB (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSS27NGMCBB replacement water filter cartridge
Replacement cartridge for this model
PSS27NGMCBB · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
bottom of the fresh-food column or at the grille line in most side-by-side builds
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSS27NGMCBB · Quick Facts
Filter locationbottom of the fresh-food column or at the grille line in most side-by-side builds
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSS27NGMCBB. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

PSS27NGMCBB specifics — where the filter actually lives

Where the filter actually lives: bottom of the fresh-food column or at the grille line in most side-by-side builds, a spot that survives trim changes across the PSS run. Mechanically the PSS27NGMCBB uses a twist-in cartridge: the cartridge drops into the keyed seat and locks with a short quarter turn.

Field notes: the line is still live when you open the bay, so keep a towel in reach, and expect the filter-status light to need a reset before it believes the new cartridge. Decode the plate and the parts question answers itself: PSS is GE’s own coding for Profile side-by-side machines, and in that format the water path is long enough that a neglected cartridge shows up as flow drop before it shows up as taste. Finish codes such as BB change the look, not the plumbing — order the cartridge by model, ignore the finish letter.

PSS vs GSS — what the prefix tells you

The catalog pairs PSS with GSS, and the split matters at order time: Profile side-by-side on the PSS side, side-by-side on the GSS side — the parts catalog runs the same cartridge across both. the 27 cu ft in the code is the size class; households that size move enough water that the six-month interval is worth honoring.

Swap it in 5 minutes

Installing the replacement water filter in the PSS27NGMCBB
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSS27NGMCBB filter questions

PSS27NGMCBB filter light will not turn off — what is the reset step?

The reset is a press-and-hold on the filter control with the cartridge in place; check the PSS27NGMCBB owner’s manual for where that control sits on your panel.

PSS27NGMCBB with no water filter installed — safe, or does it need a bypass?

No bypass needed: the MWF bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSS27NGMCBB?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →