HomeRefrigerator Water FiltersGEPSS26NHSBWW

PSS26NHSBWW
Exact-Fit Model Guide

Water Filter for the GE PSS26NHSBWW (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSS26NHSBWW replacement water filter cartridge
Replacement cartridge for this model
PSS26NHSBWW · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSS26NHSBWW · Quick Facts
Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSS26NHSBWW. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

PSS26NHSBWW specifics — where the filter actually lives

On the PSS26NHSBWW, the cartridge at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, so expect to clear one shelf edge before you have working room. Mechanically it is a quarter-turn twist-in seat: half a turn of wrist work in each direction is the whole procedure; everything else is towel management.

Owners of the PSS26NHSBWW report the same friction points: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. The PSS in PSS26NHSBWW is doing real work: when GE stamps PSS on the plate it is sorting the machine into the Profile side-by-side class — same water path, same cartridge, different cabinet. The WW tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

PSS vs GSS — what the prefix tells you

PSS or GSS: the badge difference that does (and does not) change the filter order. Profile side-by-side on the PSS side, side-by-side on the GSS side — the parts catalog runs the same cartridge across both. call it a 26 cu ft box — which is why this cartridge works for a living rather than sitting decorative.

Swap it in 5 minutes

Installing the replacement water filter in the PSS26NHSBWW
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSS26NHSBWW filter questions

Clearing the filter status light on a GE PSS26NHSBWW?

The reset is a press-and-hold on the filter control with the cartridge in place; check the PSS26NHSBWW owner’s manual for where that control sits on your panel.

GE PSS26NHSBWW: bypass plug needed without a filter?

You can, but unfiltered — the MWF bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSS26NHSBWW?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →