Water Filter for the GE PSS26NHPCBB (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSS26NHPCBB · Quick Facts

TYPE

refrigerator

YEARS MADE

—

FILTER LOCATION

at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear

FILTER SLOT

MWF bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

PSS26NHPCBB · Quick Facts

Filter locationat the base of the fresh-food compartment in most side-by-side builds — grille or lower rear

Filter slotMWF bay

Replace everyEvery 6 months

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for PSS26NHPCBB. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

Not your model? Check the finder →

PSS26NHPCBB specifics — where the filter actually lives

The PSS26NHPCBB carries its water filter at the base of the fresh-food compartment in most side-by-side builds — grille or lower rear, so expect to clear one shelf edge before you have working room. This is a twist-style bay, the friendlier design: seat the cartridge against the o-ring, quarter-turn clockwise, and let the keyed flange do the aligning for you.

Owners of the PSS26NHPCBB report the same friction points: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. The PSS prefix is the tell: PSS is GE’s own coding for Profile side-by-side machines, and in that format the water path is long enough that a neglected cartridge shows up as flow drop before it shows up as taste. BB is finish coding: handles, colors, panel options — none of it reaches the filter bay.

PSS vs GSS — what the prefix tells you

Two prefixes, two missions: Profile side-by-side versus side-by-side. Both generations draw from the same cartridge pool, so the prefix is a fit-check, not a barrier. capacity 26 cubic feet: a mid-to-full-size cabinet whose dispenser traffic sets the realistic change cadence.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSS26NHPCBB filter questions

How do I reset the filter light on the GE PSS26NHPCBB?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the PSS26NHPCBB owner’s manual page for filter status.

Can I run the GE PSS26NHPCBB with no cartridge installed?

You can, but unfiltered — the MWF bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSS26NHPCBB?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →