HomeRefrigerator Water FiltersGEPSS26NGSCCC

PSS26NGSCCC
Exact-Fit Model Guide

Water Filter for the GE PSS26NGSCCC (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSS26NGSCCC replacement water filter cartridge
Replacement cartridge for this model
PSS26NGSCCC · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
low on the fresh-food side or behind the base grille in most side-by-side layouts
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSS26NGSCCC · Quick Facts
Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSS26NGSCCC. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

PSS26NGSCCC specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it low on the fresh-food side or behind the base grille in most side-by-side layouts, a deliberate placement that keeps the swap away from the door seals and drawer rails. The seat is a twist-in design — release is counterclockwise, seating is clockwise, and the stops are firm enough that you cannot overshoot.

Two quirks worth knowing before you order: keep a folded towel under the bay before you open it; the line holds a cup of water even with the valve shut. PSS is not a trim code, it is a chassis statement: PSS marks the Profile side-by-side line in GE’s catalog, so cross-referencing cartridges by chassis rather than by door style keeps you out of the wrong-parts queue. Finish codes such as CC change the look, not the plumbing — order the cartridge by model, ignore the finish letter.

PSS vs GSS — what the prefix tells you

The catalog pairs PSS with GSS, and the split matters at order time: Ordering by prefix works because PSS means Profile side-by-side and GSS means side-by-side in this catalog — and the cartridge pool overlaps both. read the code as 26 cu ft of capacity, which tells you the cartridge’s real workload between changes.

Swap it in 5 minutes

Installing the replacement water filter in the PSS26NGSCCC
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSS26NGSCCC filter questions

Reset procedure for the change-filter alert on the PSS26NGSCCC?

With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the PSS26NGSCCC manual’s filter section has the exact control for your trim.

GE PSS26NGSCCC: bypass plug needed without a filter?

You can, but unfiltered — the MWF bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSS26NGSCCC?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →