Water Filter for the GE PSS26NGPABB
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
PSS26NGPABB specifics — where the filter actually lives
The PSS26NGPABB carries its water filter bottom of the fresh-food column or at the grille line in most side-by-side builds — usually a kneeling-height or shoulder-height swap, not a teardown. It is a twist-lock bay: offer the cartridge, feel the base o-ring register, and lock it by geometry rather than by force.
Two quirks worth knowing before you order: flush before the first glass — new carbon beds shed fines for the first gallon or so, which is cosmetic, not contamination. The PSS in PSS26NGPABB is doing real work: GE uses it across the Profile side-by-side range, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts catalog. Finish letter sets like BB never alter the bay; the MWF line fits the whole set.
PSS vs GSS — what the prefix tells you
The PSS/GSS pair divides this family by layout — Profile side-by-side versus side-by-side. Both generations draw from the same cartridge pool, so the prefix is a fit-check, not a barrier. The two digits after the letters are the cabinet size: this is a 26 cubic feet refrigerator, which sets how much dispenser work the cartridge does between changes.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
GE PSS26NGPABB: how do I clear the change-filter light?
Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the PSS26NGPABB owner’s manual page for filter status.
Can I run the GE PSS26NGPABB with no cartridge installed?
No — the MWF bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.
Are off-brand filters safe for a GE refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM MWF cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my PSS26NGPABB?
Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| OEM EveryDrop EDR1RXD1 | RECOMMENDEDClearFit Standard CF-1001 | ClearFit Lead-Shield CF-1001P | |
|---|---|---|---|
| Price / filter | $59.99 | $14.99 | $19.99 |
| NSF 42 (chlorine, taste) | ✓ Certified | ✓ Certified | ✓ Certified |
| NSF 53 (lead, cysts) | ✓ Certified | — Not tested | ✓ 99.2% lead reduction |
| Capacity | 200 gal / 6 mo | 200 gal / 6 mo | 200 gal / 6 mo |
| Filter media | Carbon block | Coconut carbon | Carbon + ion-ex |
| Subscribe & Save | — | ✓ 15% off, cancel anytime | ✓ 15% off |
| Order | Not sold here — $59.99 at EveryDrop | Add to Cart | Add to Cart |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
Also due on this fridge
Second bay · Air filter slot
EveryDrop PAULTRA Air Filter ×2
Fits W10311524 · reduces food odors · replace every 6 months
$35.98
Bundle & save 10%
Full refresh kit — CF-1001 3-pack + PAULTRA ×2
Everything this fridge needs for the next 6 months, one shipment
$64.98
More models using this filter
LFCC22426S
Water Filter for Amana ABC2037DEB14 | Exact Fit EDR4RXD1 Replacement
Water Filter for Amana ABC2037DEW14 | Exact Fit EDR4RXD1 Replacement
Water Filter for Amana ABC2037DPS | Exact Fit EDR4RXD1 Replacement
Related guides
GUIDE · 4,400 SEARCHES/MO
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
GUIDE · 2,300 SEARCHES/MO
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM · 27,100 SEARCHES/MO
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →