Home › Refrigerator Water Filters › GE › PSS26LGSBCC
Water Filter for the Profile PSS26LGSBCC (MWF)
✓ 100% compatible — no bypass plug needed
🔧 5-min push-in swap
🇺🇸 Ships from Indiana
Every cartridge that fits this model — pulled live from the catalogue:
✓
PSS26LGSBCC specifics — where the filter actually lives
The filter bay on the PSS26LGSBCC low on the fresh-food side or behind the base grille in most side-by-side layouts, so expect to clear one shelf edge before you have working room. This is a twist-style bay, the friendlier design: seat the cartridge against the o-ring, quarter-turn clockwise, and let the keyed flange do the aligning for you.
The recurring owner notes: plan on a towel for the first pull — sitting water in the line — and a five-second reset hold once the fresh cartridge is in. Prefix literacy pays here: PSS machines come from the Profile side-by-side program, and GE’s parts system rewards you for knowing it: one cartridge family covers the run. The CC tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.
PSS vs GSS — what the prefix tells you
Know your PSS from your GSS and the cartridge question halves: PSS means Profile side-by-side, GSS means side-by-side. For filter shopping the distinction matters less than you would think — same line, different cabinet. The digits in the model number read as cabinet capacity (26 cu ft), a decent proxy for how hard the filter works in daily service.
Swap it in 5 minutes
- Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
- Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
- Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
- Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.
What this filter takes out of your water
| What it targets | Standard that covers it |
|---|---|
| Chlorine taste & odor | NSF/ANSI 42 — aesthetic effects |
| Particulates, Class I | NSF/ANSI 42 — fine sediment |
| Lead | NSF/ANSI 53 — health effects |
| Cysts (cryptosporidium, giardia) | NSF/ANSI 53 — microbial |
| PFOA & PFOS | NSF/ANSI 53 (P473) — varies by cartridge |
Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.
PSS26LGSBCC filter questions
Reset procedure for the change-filter alert on the PSS26LGSBCC?
With the new cartridge seated, press and hold the filter reset until the light clears — panel placement differs, so the PSS26LGSBCC manual’s filter section has the exact control for your trim.
Does the GE PSS26LGSBCC need a bypass plug when the filter is out?
No — run it empty if you like; the MWF bay needs no bypass plug, it simply passes water through untreated.
Are off-brand filters safe for a GE refrigerator?
Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.
Why is the OEM MWF cartridge so much more expensive?
Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.
How often should I replace the filter in my PSS26LGSBCC?
Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.
Do I need to turn off the water supply to change it?
No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.
Every filter that fits your fridge
| Cartridge | OEM MWF | RECOMMENDEDMWF Replacement Water Filter · 1-Pack – ClearFit | MWF Replacement Water Filter · 3-Pack – ClearFit | MWF Replacement Water Filter · 6-Pack – ClearFit |
|---|---|---|---|---|
| Price | OEM list | $14.99 | $37.47 | $67.44 |
| Verified fit | ✓ the bay cartridge | View & buy → | View & buy → | View & buy → |
This filter expires six months from today
Your HVAC filter is probably on a different cycle. Track them all in one place.
months until this filter should be replaced (200-gal rated life)
Free tool · tracks fridge + HVAC + whole-house · auto-refill optional
More models using this filter
Related guides
POPULAR GUIDE
How to change a Whirlpool refrigerator water filter
Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →
POPULAR GUIDE
How to reset your Whirlpool filter light
Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →
WATER PROBLEM GUIDE
Does your fridge filter remove fluoride?
What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →