HomeRefrigerator Water FiltersGEPSR26UHPBSS

PSR26UHPBSS
Exact-Fit Model Guide

Water Filter for the GE PSR26UHPBSS (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSR26UHPBSS replacement water filter cartridge
Replacement cartridge for this model
PSR26UHPBSS · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
in the fresh-food compartment, placement dependent on the dispenser package
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSR26UHPBSS · Quick Facts
Filter locationin the fresh-food compartment, placement dependent on the dispenser package
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSR26UHPBSS. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

PSR26UHPBSS specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it in the fresh-food compartment, placement dependent on the dispenser package, a spot that survives trim changes across the refrigerator run. Mechanically it is a quarter-turn twist-in seat: the cartridge drops into the keyed seat and locks with a short quarter turn.

Owners of the PSR26UHPBSS report the same friction points: expect dribble at the bay on removal even with the supply off, and remember the indicator will not self-clear — hold the reset control. One more anchor for the parts search: this chassis drinks from the MWF family, one of the most cross-referenced cartridges in the GE catalog. Finish codes such as SS change the look, not the plumbing — order the cartridge by model, ignore the finish letter.

Reading the PSR26UHPBSS model code — what the digits tell you

Cabinet class 26 cu ft — a box that size leans on the dispenser, so the six-month cartridge interval earns its keep. Hold this constant while shopping: the same MWF family covers this chassis end to end.

Swap it in 5 minutes

Installing the replacement water filter in the PSR26UHPBSS
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSR26UHPBSS filter questions

How do I reset the filter light on the GE PSR26UHPBSS?

Lock in the new cartridge first, then hold the reset control for a few seconds — the PSR26UHPBSS manual documents the button for each panel variant.

PSR26UHPBSS with no water filter installed — safe, or does it need a bypass?

No cap needed — the MWF bay passes water unfiltered while empty; it does not leak, it just skips filtration.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSR26UHPBSS?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →