HomeRefrigerator Water FiltersGEPSI23SGRASV

PSI23SGRASV
Exact-Fit Model Guide

Water Filter for the GE PSI23SGRASV (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSI23SGRASV replacement water filter cartridge
Replacement cartridge for this model
PSI23SGRASV · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
low on the fresh-food side or behind the base grille in most side-by-side layouts
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSI23SGRASV · Quick Facts
Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSI23SGRASV. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

PSI23SGRASV specifics — where the filter actually lives

The filter bay on the PSI23SGRASV low on the fresh-food side or behind the base grille in most side-by-side layouts, a spot that survives trim changes across the PSI run. Mechanically it is a quarter-turn twist-in seat: align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.

Field notes: a stubborn first twist when the old o-ring has set, and a change-filter light that will not clear itself until you hold the reset. PSI reads as a chassis statement rather than a trim code: it usually marks a Profile side-by-side layout, which means shared cartridge economics — one media family, dozens of cabinet variants, all drinking from the same parts line. Trailing letters like SV denote trim and finish: stainless, panel-ready, handle variants. The water path is identical across them.

PSI vs PSK — what the prefix tells you

Same mission, different eras: PSI and PSK both mean Profile side-by-side here — order by chassis code and the cartridge sorts itself out. the 23 cu ft figure in the code is the household size proxy; larger households breach the rated gallons before the calendar does.

Swap it in 5 minutes

Installing the replacement water filter in the PSI23SGRASV
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSI23SGRASV filter questions

Clearing the filter status light on a GE PSI23SGRASV?

The reset is a press-and-hold on the filter control with the cartridge in place; check the PSI23SGRASV owner’s manual for where that control sits on your panel.

GE PSI23SGRASV: bypass plug needed without a filter?

No cap needed — the MWF bay passes water unfiltered while empty; it does not leak, it just skips filtration.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSI23SGRASV?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →