HomeRefrigerator Water FiltersGEPSI23NGTCBV

PSI23NGTCBV
Exact-Fit Model Guide

Water Filter for the GE PSI23NGTCBV (MWF)

Your GE refrigerator takes the MWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSI23NGTCBV replacement water filter cartridge
Replacement cartridge for this model
PSI23NGTCBV · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
bottom of the fresh-food column or at the grille line in most side-by-side builds
FILTER SLOT
MWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSI23NGTCBV · Quick Facts
Filter locationbottom of the fresh-food column or at the grille line in most side-by-side builds
Filter slotMWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSI23NGTCBV. Cross-checked against GE service documentation — this model family uses the MWF bay with no chip or bypass restrictions.

PSI23NGTCBV specifics — where the filter actually lives

The filter bay on the PSI23NGTCBV bottom of the fresh-food column or at the grille line in most side-by-side builds, the same estate every Profile side-by-side refrigerator in this family uses. Mechanically the PSI23NGTCBV uses a twist-in cartridge: one twist to release, one to lock; between them you are holding the entire service procedure.

The recurring owner notes: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. The badge reads PSI23NGTCBV, but the chassis reads PSI: generally a Profile side-by-side machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. That BV suffix is trim-level shorthand. GE kept the MWF bay common to every finish in the line.

PSI vs PSK — what the prefix tells you

The Profile side-by-side family keeps one water path across PSI and PSK; nothing about the cartridge changes between them. The two digits after the letters are the cabinet size: this is a 23 cubic feet refrigerator, which sets how much dispenser work the cartridge does between changes.

Swap it in 5 minutes

Installing the replacement water filter in the PSI23NGTCBV
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSI23NGTCBV filter questions

PSI23NGTCBV filter light will not turn off — what is the reset step?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the PSI23NGTCBV owner’s manual page for filter status.

PSI23NGTCBV with no water filter installed — safe, or does it need a bypass?

The bay self-seals: with no cartridge the PSI23NGTCBV still dispenses, just unfiltered. No bypass plug exists for this line.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSI23NGTCBV?

Every six months or at the rated gallon capacity, whichever comes first — the MWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MWF cartridge

This bay takes the OEM MWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →