HomeRefrigerator Water FiltersGEPSI23MGWCWV

PSI23MGWCWV
Exact-Fit Model Guide

Water Filter for the GE PSI23MGWCWV (MSWF)

Your GE refrigerator takes the MSWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSI23MGWCWV replacement water filter cartridge
Replacement cartridge for this model
PSI23MGWCWV · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
low on the fresh-food side or behind the base grille in most side-by-side layouts
FILTER SLOT
MSWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSI23MGWCWV · Quick Facts
Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts
Filter slotMSWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSI23MGWCWV. Cross-checked against GE service documentation — this model family uses the MSWF bay with no chip or bypass restrictions.

PSI23MGWCWV specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it low on the fresh-food side or behind the base grille in most side-by-side layouts, the same estate every Profile side-by-side refrigerator in this family uses. The seat is a twist-in design — align the ears, seat it, and rotate until the stop catches — a five-minute job start to finish.

The recurring owner notes: the reset control is the step everyone skips; the light will not acknowledge a new cartridge on its own. Read the prefix and the maintenance writes itself: PSI on this badge family usually means Profile side-by-side stock, which is why fit charts list cartridges by chassis code first. The WV ending is a finish code — color and handle options, not mechanical ones. Every finish of this chassis takes the same cartridge.

PSI vs PSK — what the prefix tells you

PSI and PSK are neighbors in the same Profile side-by-side family; the catalog uses them for different production runs, the parts system does not. capacity 23 cu ft: a mid-to-full-size cabinet whose dispenser traffic sets the realistic change cadence.

Swap it in 5 minutes

Installing the replacement water filter in the PSI23MGWCWV
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSI23MGWCWV filter questions

PSI23MGWCWV filter light will not turn off — what is the reset step?

Hold the filter-reset control a few seconds after the swap; the status light clears only with a seated cartridge, and the PSI23MGWCWV manual maps the control by panel type.

Does the GE PSI23MGWCWV need a bypass plug when the filter is out?

No bypass needed: the MSWF bay closes on its own, and running empty simply means the water skips filtration until you seat a new cartridge.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MSWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSI23MGWCWV?

Every six months or at the rated gallon capacity, whichever comes first — the MSWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MSWF cartridge

This bay takes the OEM MSWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →