HomeRefrigerator Water FiltersGEPSHF6YGXCDWW

PSHF6YGXCDWW
Exact-Fit Model Guide

Water Filter for the GE PSHF6YGXCDWW (MSWF)

Your GE refrigerator takes the MSWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSHF6YGXCDWW · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
low on the fresh-food side or behind the base grille in most side-by-side layouts
FILTER SLOT
MSWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSHF6YGXCDWW · Quick Facts
Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts
Filter slotMSWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSHF6YGXCDWW. Cross-checked against GE service documentation — this model family uses the MSWF bay with no chip or bypass restrictions.

PSHF6YGXCDWW specifics — where the filter actually lives

Finding the bay is the easy part — this chassis puts it low on the fresh-food side or behind the base grille in most side-by-side layouts, so expect to clear one shelf edge before you have working room. The seat is a twist-in design — one twist to release, one to lock; between them you are holding the entire service procedure.

Field notes: carbon fines in the first pours are normal for a fresh bed, and the filter timer only restarts when you hold the reset. PSH reads as a chassis statement rather than a trim code: count on PSH to place this unit among Profile side-by-side builds; that placement carries the water-path geometry with it. That WW suffix is trim-level shorthand. GE kept the MSWF bay common to every finish in the line.

PSH vs PSK — what the prefix tells you

PSH versus PSK is an era split within Profile side-by-side stock, not a cabinet split — the cartridge family spans both runs. One more anchor for the parts search: this chassis drinks from the MSWF family, one of the most cross-referenced cartridges in the GE catalog.

Swap it in 5 minutes

Installing the replacement water filter in the PSHF6YGXCDWW
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

ClearFit CF-1001 replacement cartridge for PSHF6YGXCDWW-class filters
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSHF6YGXCDWW filter questions

How to reset the water filter indicator: GE PSHF6YGXCDWW?

Hold the filter-reset control a few seconds after the swap; the status light clears only with a seated cartridge, and the PSHF6YGXCDWW manual maps the control by panel type.

Running the PSHF6YGXCDWW with an empty filter bay — does it need a cap?

No — run it empty if you like; the MSWF bay needs no bypass plug, it simply passes water through untreated.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MSWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSHF6YGXCDWW?

Every six months or at the rated gallon capacity, whichever comes first — the MSWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MSWF cartridge

This bay takes the OEM MSWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

GUIDE · 4,400 SEARCHES/MO

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

GUIDE · 2,300 SEARCHES/MO

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM · 27,100 SEARCHES/MO

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →