HomeRefrigerator Water FiltersGEPSHF6TGXCDBB

PSHF6TGXCDBB
Exact-Fit Model Guide

Water Filter for the GE PSHF6TGXCDBB (MSWF)

Your GE refrigerator takes the MSWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSHF6TGXCDBB replacement water filter cartridge
Replacement cartridge for this model
PSHF6TGXCDBB · Quick Facts
TYPE
refrigerator
YEARS MADE
FILTER LOCATION
low on the fresh-food side or behind the base grille in most side-by-side layouts
FILTER SLOT
MSWF bay
REPLACE EVERY
Every 6 months
ALSO BRANDED AS
PSHF6TGXCDBB · Quick Facts
Filter locationlow on the fresh-food side or behind the base grille in most side-by-side layouts
Filter slotMSWF bay
Replace everyEvery 6 months
Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

Verified fit for PSHF6TGXCDBB. Cross-checked against GE service documentation — this model family uses the MSWF bay with no chip or bypass restrictions.

PSHF6TGXCDBB specifics — where the filter actually lives

Where the filter actually lives: low on the fresh-food side or behind the base grille in most side-by-side layouts — usually a kneeling-height or shoulder-height swap, not a teardown. The seat is a twist-in design — look for the index lugs, offer the cartridge, and rotate until they disappear into the housing.

Order-day practicalities: the first removal takes more force than every later one, and skipping the reset leaves a change-light glaring at a perfectly fresh cartridge. The badge reads PSHF6TGXCDBB, but the chassis reads PSH: it usually places the machine in the Profile side-by-side family, a strong hint at the cartridge line, the reset behavior, and the service documentation worth consulting. The BB ending is a finish code — color and handle options, not mechanical ones. Every finish of this chassis takes the same cartridge.

PSH vs PSK — what the prefix tells you

The Profile side-by-side family keeps one water path across PSH and PSK; nothing about the cartridge changes between them. Under the cabinet differences one thing holds: this chassis drinks from the MSWF family, one of the most cross-referenced cartridges in the GE catalog.

Swap it in 5 minutes

Installing the replacement water filter in the PSHF6TGXCDBB
  • Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
  • Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
  • Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
  • Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

Old cartridge vs new — the difference a timely swap makes
What it targetsStandard that covers it
Chlorine taste & odorNSF/ANSI 42 — aesthetic effects
Particulates, Class INSF/ANSI 42 — fine sediment
LeadNSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)NSF/ANSI 53 — microbial
PFOA & PFOSNSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSHF6TGXCDBB filter questions

Clearing the filter status light on a GE PSHF6TGXCDBB?

Seat the new cartridge first, then hold the filter-reset control for a few seconds until the status light clears — the exact button placement varies by control panel, so check the PSHF6TGXCDBB owner’s manual page for filter status.

Is a bypass plug required for the PSHF6TGXCDBB when the cartridge is removed?

You can, but unfiltered — the MSWF bay needs no bypass plug; it just passes water through without filtering while the cartridge is out.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MSWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSHF6TGXCDBB?

Every six months or at the rated gallon capacity, whichever comes first — the MSWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MSWF cartridge

This bay takes the OEM MSWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →

This filter expires six months from today

Your HVAC filter is probably on a different cycle. Track them all in one place.

6

months until this filter should be replaced (200-gal rated life)

Free tool · tracks fridge + HVAC + whole-house · auto-refill optional

More models using this filter

refrigerator
refrigerator
refrigerator
refrigerator

Related guides

POPULAR GUIDE

How to change a Whirlpool refrigerator water filter

Every Filter 1–6 bay location — including the door-mounted bays on WRX models, with door-open angles and cap-release quirks. — read the guide →

POPULAR GUIDE

How to reset your Whirlpool filter light

Filter 1–6 indicator maps showing which key actually clears the light on your panel. — read the guide →

WATER PROBLEM GUIDE

Does your fridge filter remove fluoride?

What EDR1RXD1-class carbon blocks actually take out — and the systems that do remove fluoride. — read the guide →