Water Filter for the GE PSF26RGWCWW (MSWF)

Your GE refrigerator takes the MSWF slot. Below is every filter that fits — OEM and certified alternatives — with real prices.

✓ 100% compatible — no bypass plug needed

🔧 5-min push-in swap

🇺🇸 Ships from Indiana

PSF26RGWCWW · Quick Facts

TYPE

refrigerator

YEARS MADE

—

FILTER LOCATION

high on the fresh-food side in most French-door layouts — upper back or left wall

FILTER SLOT

MSWF bay

REPLACE EVERY

Every 6 months

ALSO BRANDED AS

—

PSF26RGWCWW · Quick Facts

Filter locationhigh on the fresh-food side in most French-door layouts — upper back or left wall

Filter slotMSWF bay

Replace everyEvery 6 months

Typical installTwist or push — 5 minutes, no tools

Every cartridge that fits this model — pulled live from the catalogue:

✓

Verified fit for PSF26RGWCWW. Cross-checked against GE service documentation — this model family uses the MSWF bay with no chip or bypass restrictions.

Not your model? Check the finder →

PSF26RGWCWW specifics — where the filter actually lives

Where the filter actually lives: high on the fresh-food side in most French-door layouts — upper back or left wall, a deliberate placement that keeps the swap away from the door seals and drawer rails. The seat is a twist-in design — a quarter turn one way to release, the other to seat, and the only tool you need is a towel for the drip.

Field notes: keep a folded towel under the bay before you open it; the line holds a cup of water even with the valve shut. The PSF in PSF26RGWCWW is doing real work: generally a Profile French-door machine, and the filter bay inherits the geometry that implies — treat as typical, not absolute. The WW tail marks finish variants of one chassis; the filter bay is shared across the entire finish range.

PSF vs the rest of the catalog — what the prefix tells you

Know your PSF from your the rest of the catalog and the cartridge question halves: Profile French-door builds carry PSF; the neighboring layout builds carry the rest of the catalog. Filter-wise the two lines converge on one cartridge family. Capacity check: the 26 cu ft in the code is the box size, and bigger boxes push more water through the same cartridge between swaps.

Swap it in 5 minutes

Twist the old cartridge a quarter turn counterclockwise and pull it straight down — keep a towel in reach for the dribble.
Fill the new cartridge with cold tap water so the chamber is not fighting an air pocket.
Offer the new cartridge to the bay, push up, and twist a quarter turn clockwise until the stop catches.
Run two gallons through the dispenser to flush carbon fines, then hold the filter-reset control until the status light clears.

What this filter takes out of your water

What it targets	Standard that covers it
Chlorine taste & odor	NSF/ANSI 42 — aesthetic effects
Particulates, Class I	NSF/ANSI 42 — fine sediment
Lead	NSF/ANSI 53 — health effects
Cysts (cryptosporidium, giardia)	NSF/ANSI 53 — microbial
PFOA & PFOS	NSF/ANSI 53 (P473) — varies by cartridge

Coverage above lists what the standard addresses, not a performance claim for any specific cartridge — removal claims vary by certificate, so check the NSF listing for the exact part number you are buying.

PSF26RGWCWW filter questions

Clearing the filter status light on a GE PSF26RGWCWW?

Lock in the new cartridge first, then hold the reset control for a few seconds — the PSF26RGWCWW manual documents the button for each panel variant.

Does the GE PSF26RGWCWW need a bypass plug when the filter is out?

No — the MSWF bay seals on the cartridge itself, so removing it just means unfiltered water until the next change, not a leak.

Are off-brand filters safe for a GE refrigerator?

Certified aftermarket cartridges are built to the same NSF test standards as the OEM part, and federal warranty law (Magnuson-Moss) protects your coverage when you use them.

Why is the OEM MSWF cartridge so much more expensive?

Part of the OEM price is the badge and the distribution chain. Certified alternatives meet the same test standards at a lower unit price, especially in multi-packs.

How often should I replace the filter in my PSF26RGWCWW?

Every six months or at the rated gallon capacity, whichever comes first — the MSWF class cartridges all share that service interval.

Do I need to turn off the water supply to change it?

No — the bay is designed for a live swap. Expect a small dribble, keep a towel in reach, and flush a couple of gallons through the new cartridge before the first glass.

Every filter that fits your fridge

OEM MSWF cartridge

This bay takes the OEM MSWF. ClearFit verified-fit alternatives for this exact slot are being staged — every compatible option for your fridge is one lookup away.

Check every filter that fits →